• Power-sharing technology: Dynamically allocates power evenly or asymmetrically across outputs without having to bridge channels or lose channel count when powering Bose Professional loudspeakers.

• Bose Professional certified presets and ControlSpace Designer integration: Delivers the best performance, loudspeaker protection, and visibility of the entire Bose Professional system from a single UI for easy design, configuration, control, and monitoring.

• Proven Powersoft reliability: Ensures the systems operate every day, mitigating non-billable service calls.

• Flexible outputs: Capable of handling either low-impedance (2, 4, 8Ω) or high-impedance (70, 100V) loudspeaker loads.

• Built-in Dante audio: Supports up to 4 digital input channels from a Dante network eliminating the requirement of ordering and installing an accessory network card.

• 4 analog inputs: Provide line-level source connections.

• PowerShare Design Tool: A downloadable design tool that allows system designers the ability to choose their PowerShare amp and simulate the power-sharing capability that, in some cases, can lead to a lower-power model requirement and cost savings.

• GPIO connections: Provide a remote level, on/off, and alarm triggers.

• Network monitoring: Provides real-time system performance data, minimizing downtime, guesswork, and unnecessary service calls.

• Rack-friendly 1RU design: That is only 358 mm (14.1 in) deep eliminating the need for oversized racks.

SPECS

Technical Specification

AMPLIFICATION

Channel Separation (Crosstalk): -70 dB typical at 1 kHz
Gain, Low-Impedance: 26 dB, 29 dB, 32 dB, 35 dB (selectable)
Maximum Peak Power (Symmetrical): 800 W at 2 Ω / 600 W at 4 Ω, 8 Ω, 70V, 100V
Maximum Peak Power (Asymmetrical): 2200 W at 2 Ω, 4 Ω, 8 Ω, 70V, 100V
Rated Power (Asymmetrical): 1100 W at 2 Ω / 1100 W at 4 Ω in 70V mode / 1100 W at 8 Ω in 100V mode / 1100 W at 70V, 100V
SNR: > 104 dB (A-weighted)
Frequency Response: 20 Hz – 20 kHz (±1.0 dB), 1 W at 8 Ω
Number of Channels: 4
Power Class: Class D
Rated Power (Symmetrical): 400 W per channel at 2 Ω / 300 W per channel at 4 Ω, 8 Ω, 70V, 100V
THD+N: < 0.1% (< 0.05% typical, from 0.1 W to half-power)

AUDIO INPUTS, ANALOG

Input Channels: 4 balanced, line
Connectors: (1) 6-pin Euroblock
Input Impedance: 20 kΩ
Maximum Input Level: 20 dBu
Sensitivity: 2.48 Vrms at 26 dB gain, 1.76 Vrms at 29 dB gain, 1.24 Vrms at 32 dB gain, 0.88 Vrms at 35 dB gain

AUDIO INPUTS/OUTPUTS, DIGITAL

Channels: 4 Dante in
Connectors: (1) RJ-45 Dante in
Type: 6-pin Euroblock

AUDIO OUTPUTS, ANALOG

Channels: 4
Connectors: (1) 8-pin Euroblock, 7.62 mm

COMPLIANCE

EMC: Meets all EN55103-2 immunity requirements for E2 electromagnetic environment

ELECTRICAL

Current Draw (Idle): 0.45 A at 115 VAC, 60 Hz / 0.25 A at 230 VAC, 50 Hz
Mains Connector: IEC C20 inlet
Mains Voltage: 100–240 VAC (±10%), 50/60 Hz
Protections: High temperature, DC, output short circuit, high frequency, excessively low/high AC mains voltage, inrush current, clip, peak, long-term/RMS
AC Power Consumption: 31.1 W idle, 251 W maximum at 1/8 power at 4 Ω

GENERAL

Software Applications: ControlSpace Designer 5.12 or later (Windows)
Computer Interface Connection: RJ-45 (Ethernet)
Notification Outputs: (1) 12-pin Euroblock (3 pins per channel), general purpose

INDICATORS AND CONTROLS

Front Panel Controls: (1) Power button, (1) Soft reset button, (1) Hard reset button, (1) Check button, (4) Channel attenuation controls
Rear Panel Controls: 16 output DIP switches (4 per channel), 8 system configuration DIP switches
LED Status Indicators: (21) Channel meter LEDs, (7) System status LEDs, (2) Power status LEDs

INTEGRATED DSP

Delay: 2 s (input) + 100 ms (output) for time alignment
Internal Precision: 32-bit floating-point
Equalization: Input: 8-band parametric EQ (±15 dB), notch, shelving, high-pass, low-pass / Array EQ (ArenaMatch) / Band-pass crossover / Loudspeaker: 9-band parametric EQ (±15 dB), notch, shelving
Crossover Types: Butterworth, Bessel, or Linkwitz-Riley, up to 48 dB/octave
A/D and D/A Converters: 48 kHz / 24-bit
Audio Latency: 2.5 ms, fixed-latency architecture
DSP-Enabled: Yes
Limiters: Peak voltage, RMS voltage, clip
Presets: Bose Professional loudspeaker presets
Processing Functions: Input EQ, Array EQ, Loudspeaker EQ, Peak voltage limiter, RMS voltage limiter, Delay, Band-pass, Matrix mixer

PHYSICAL

Colors: Black
Cooling System: Continuous temperature-controlled variable-speed fan, front-to-back airflow
Suspension/Mounting: Rack-mounting
Product Dimensions (H × W × D): 19.0 in × 1.8 in × 14.1 in (483 mm × 45 mm × 358 mm)
Net Weight: 15.4 lb (7.0 kg)
Rack Spaces: 1
Shipping Weight: 22.8 lb (10.3 kg)

Mechanical Diagrams

rear-view

 

 

top-view

 

 

Product Codes

876599-0100 – 100 V, 120 V, 230 V (Americas & Europe)
878918-2130 – 230 V (Asia Pacific)
878918-5110 – 240 V (Australia)

Warranty Period

5 years

Included in Packaging

• (1) 4-pin Euroblock connector
• (1) 8-pin Euroblock connector
• (3) 12-pin Euroblock connectors
• (1) IEC power cord
• (1) Installation guide
• (1) PowerShareX PSX1204D